Cold Applied Waterproof Black Pp Woven Pipe Mechanical Protection Tape - Jining qiangke pipe anticorrosion materials co., ltd

Cold Applied Waterproof Black Pp Woven Pipe Mechanical Protection Tape

PRICE: contract price
Company:
Jining qiangke pipe anticorrosion materials co., ltd
Contact Person:
Jecky Li
Phone:
86-0537-6400111


Product Description
If you are looking for China golden supplier and China good supplier cold applied waterproof black pp woven pipe mechanical protection tape, good quality and high quality cold applied waterproof black pp woven pipe mechanical protection tape, please feel free to contact Jining Qiangke Pipe Anticorrosion Materials Co.,Ltd.System DescriptionThe GTC Coating System/cold applied waterproof black pp woven pipe mechanical protection tape is designed for the corrosion protection of new and existing pipelines. The coating layer consists of a tough, woven polypropylene backing with a high tack butyl rubber adhesive. An additional layer of POLYKEN 980 or 955 should also be used on pipes larger than 12" diameter to improve the soil stress resistance of the system.It is designed for the corrosion protection of new and existing pipelines. The coating layer consists of a tough, woven polypropylene backing with a high tack butyl rubber adhesive.It’s also used for both metallic pipelines and waterproofing works against outdoor bad weathers .Anti corrosion adhesive tape can be used extensively in metal pipes of all pipelines and facilities in petroleum, natural gas, petrochemical industry, electric power, metallurgy, urban gas pipeline network and water supply etc. For efficient and long lasting outer anti corrosion.UsesWaterproofing--Waterproofing membrane for basements,sub structures and flat deck applications. plazas, bridge, vehicular traffic structures, or parking decks overlaid with an asphalt concrete wearing course.-Tough, high performance waterproof membrane for critical substructures and civil engineering works.-Provides a vapor and waterproof membrane to water excluding structures and protects concrete from attack by aggressive ground salts.-Protection for wall ,floor, roof, corner, basement etc. to against from attack by bad weather, rain, acid alkaline saltPipelines protection_ Weld joints_ Bends_ Fittings_ Bare pipe lengths_ Pipe rehab and repair_Bare pipe length_Line travel pipelinesStructuresBacking :   a tough ,woven  polypropyleneAdhesive :  high tack butyl rubber adhesiveInterleaf: Anti-adhesive Film Treated with Silicone.Features_ Can be applied over a wide temperature range_ Good conformability and consistent uniform thickness _ Heavy duty butyl bitumen compound adhesive ensures a strong bond & impervious seal._ Excellent adhesion to pipe and self_ Flexibility provides extra protection at vulnerable areas_ Compatible with common pipe coatings_ Excellent resistance to cathodic disbondingTechnical Datas PROPERPTIESUNITTEST METHODTYPICAL VALUESPOLYKENGTC 40POLYKENGTC 50POLYKENGTC 60POLYKENGTC 65Total thicknessmilASTM D 100040mils(1.0mm)50mils(1.27mm)60mils(1.52mm)65mils(1.65mm)Tensile StrengthKg/cmASTM D 100035353535Peel adhesionTo primed pipeKg/cmASTM D 100025283034To backingKg/cmASTM D 1000202526.528Dielectric StrengthKV/mmASTM D 100020232630Water Absorptivity%ASTM D 5700.10.080.080.06Ordering InformationPOLYKEN GTCEg.: POLYKEN GTC 4"×50'POLYKEN GTCProduct Model No.Standard ordering options50Total tape thickness in mils40mils(1.0mm),50mils(1.27mm),60mils(1.52mm),65mils(1.65mm)4Tape width in inches2"(50mm),,4"(100mm),6"(150mm),50Tape roll length in feet50ft(15M),100ft(30M)Material Requirements(Width of Coating in inches) ×(Area of pipe in square feet)*----------------------------------------------------------------------------=Squares **of Coating Required(Width of coating in inches-Overlap in inches) ×100*Area of pipe in square feet=(Diameter in inches)/12×3.1416×(Length in feet)**One square=One hundred square feet=9.29 square meters(Width of Coating in mm) ×(Area of pipe in square meter)*-------------------------------------------------------------------------------=Square meter of Coating Required(Width of coating in mm-Overlap in mm)*Area of pipe in square meter=(Diameter in mm)/1000×3.1416×(Length in meter)


Other products

Join Free